Automatic Identification System (AIS)

CLASS B AIS CHARTPLOTTER: AIS-50N
Features / Specifications:
  • Preloaded digital worldwide cartography
  • Real time display of navigation information
  • Updated electronic chart available.
  • Built-in map with range rings and 12zoom ranges from 0.01 to 32nm
  • Cursor ID mode allows easy readout of target vessel
  • Display : 5.6" diagonal, TFT color, 480 * 640 pixels
  • Supply Voltage : 10 to 34 V DC
  • Operating temp.: -10°C to 50°C
  • Alarms: Arrival radius, anchor, XTE, danger, too shallow, too deep, fish, temperature, temperature rate, low battery, low fuel (optional), loss of DGPS fix, radar guard zone, dangerous AIS vessels.
  • Chart card: C-MAP NT MAX™ / NAVICONICS® GOLD
  • User card : SD Card
  • Waypoints: Up to 5000, with default or user defined alphanumeric names up to eight characters.
  • Chart Scale : 0.2 to 500 nm for chart (chart dependent)
  • NMEA : NMEA 0183 4800, 9600, 38400 baud NMEA 2000
CLASS B AIS TRANSPONDER: AIS-50B
Features / Specifications:
  • Transfer data via AIS channel
    87B(161.975MHZ)&88B(162.025MHZ)
  • Dual baud rate 4800 or 38400
  • RS-232, 422 Input/output Port
  • Simple connection through Rs-232, 422
  • LED display for easy status check-up
  • Enable to transreceive SRM(Safety Related Message)
  • Frequency : 156.025MHZ ~ 162.025MHZ
    Default channel 88B, AIS(162.025MHZ)
    Default channel 87B, AIS(161.975MHZ)
  • Channel Spacing : 25kHZ
  • VHF ANT connector : TNC / GPS ANT connector : BNC
  • Antenna impedance : 50(impedance symbol)
  • Frequency Stability rate : ± 10PPM(-20°C ~ +60°C)
  • Data rate : 9600 bps
  • Power Supply: DC 12V ~ 34V (DC 12V, 1.2A Max.)
  • Operation temp.: -15°C ~ +55°C
  • Output Power : 2W(33dBm ± 1.5 dB)
  • Modulation : GMSK / Sensitivity : -107dBm
CLASS A/B AIS RECEIVER: SI-60RX
Features / Specifications:
  • Real time monitoring of other vessels' MMSI, Navigation information, connected to a compatible NAVIS plotter, MKD and PC.
  • Cost-Saving & Simple installation
  • Dual Channel Receiver (CLASS "A" & "B")
  • RS-232, 422 Input/output Port.
  • Rx frequency : 156.025MHZ ~ 162.025MHZ
    RX Ch1 – Default channel 88B, AIS(162.025MHZ)
    RX Ch2 – Default channel 87B, AIS(161.975MHZ)
  • Channel Spacing : 25KHZ
  • Operation : Simplex & Semi-duplex
  • Antenna impedance : 50symbol(SO-239)
  • Frequency stability rate : ±10PPm(-20°C ~ _60°C)
  • External Interface : ITU/NMEA-0183
  • Power supply : 12~24VDC, 0.4A Max.(DC 12V)
  • Operation Temperature : -15°C ~ +55°C